[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looperlative LP-1
swapped
no dice
thanks for the idea
On Jul 8, 2011, at 12:21 PM, Daniel Thomas wrote:
> Did you try swapping out the midi cable?
> Midi cables short out just like any other cable. Its rare but I have
> seen it at the back of my own midi patch bay-- took me days to figure it
> out--- Of course, had I dug in my toolbox for the Midi Tester when I
> first suspected a possible short, It would have taken minutes to figure
> out.
>
> D
> On Jul 8, 2011, at 10:12 AM, Chris Beaty wrote:
>
>> I've connected the FC-200 to my line 6 delay pro
>> it's set to get info on channel 1
>> it reads all the program changes I send it
>> I have not changed the settings on the FC-200, and it used to work
>> I also connected 2 midi keyboards to the LP1, put the LP1 in MIDI/USER
>> btn mode and hit every key and button on the boards
>> nothing
>> I may be missing something simple here...but what?
>> Thanks,
>> Chris
>> On Jul 8, 2011, at 12:07 PM, Daniel Thomas wrote:
>>
>>> Any midi data filters running in your midi configuration?
>>>
>>> Do you have an LED midi tester? This might help you route out whether
>>> its a problem with a jack, cable, or midi config.
>>>
>>>
>>> Daniel
>>> On Jul 8, 2011, at 10:05 AM, Chris Beaty wrote:
>>>
>>>> I've tried all 16.....one, after the other
>>>> Wish I knew what I was missing here...
>>>> and this did work, once upon a time
>>>> any other notions?
>>>> Chris
>>>> On Jul 8, 2011, at 12:01 PM, andy butler wrote:
>>>>
>>>>> Chris Beaty wrote:
>>>>>> Hi simeon,
>>>>>> thanks for getting back
>>>>>> I'm simply trying to control the LP1 with my Roland FC-200
>>>>>> this actually used to work, once upon a time
>>>>>> now, when I put the unit in the MIDI/USER btn mode, and push the
>>>>>> FC-200 pedals, I get Nada
>>>>>> I've checked the midi traffic withe pedal-channel 1 and other midi
>>>>>> devices see incoming data from the FC-200
>>>>>
>>>>> That would be a sign that the LP1 midi channel is not set to one
>>>>> that the FC-200 is sending on.
>>>>>
>>>>> andy
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>> Thanks,
>>>> Chris
>>>>
>>>>
>>>>
>>>
>>>
>>
>> Thanks,
>> Chris
>>
>>
>>
>
>
Thanks,
Chris