[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looperlative LP-1
I've connected the FC-200 to my line 6 delay pro
it's set to get info on channel 1
it reads all the program changes I send it
I have not changed the settings on the FC-200, and it used to work
I also connected 2 midi keyboards to the LP1, put the LP1 in MIDI/USER btn
mode and hit every key and button on the boards
nothing
I may be missing something simple here...but what?
Thanks,
Chris
On Jul 8, 2011, at 12:07 PM, Daniel Thomas wrote:
> Any midi data filters running in your midi configuration?
>
> Do you have an LED midi tester? This might help you route out whether
> its a problem with a jack, cable, or midi config.
>
>
> Daniel
> On Jul 8, 2011, at 10:05 AM, Chris Beaty wrote:
>
>> I've tried all 16.....one, after the other
>> Wish I knew what I was missing here...
>> and this did work, once upon a time
>> any other notions?
>> Chris
>> On Jul 8, 2011, at 12:01 PM, andy butler wrote:
>>
>>> Chris Beaty wrote:
>>>> Hi simeon,
>>>> thanks for getting back
>>>> I'm simply trying to control the LP1 with my Roland FC-200
>>>> this actually used to work, once upon a time
>>>> now, when I put the unit in the MIDI/USER btn mode, and push the
>>>> FC-200 pedals, I get Nada
>>>> I've checked the midi traffic withe pedal-channel 1 and other midi
>>>> devices see incoming data from the FC-200
>>>
>>> That would be a sign that the LP1 midi channel is not set to one that
>>> the FC-200 is sending on.
>>>
>>> andy
>>>
>>>
>>>
>>>
>>>
>>
>> Thanks,
>> Chris
>>
>>
>>
>
>
Thanks,
Chris