[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Looperlative LP-1
Any midi data filters running in your midi configuration?
Do you have an LED midi tester? This might help you route out whether its
a problem with a jack, cable, or midi config.
Daniel
On Jul 8, 2011, at 10:05 AM, Chris Beaty wrote:
> I've tried all 16.....one, after the other
> Wish I knew what I was missing here...
> and this did work, once upon a time
> any other notions?
> Chris
> On Jul 8, 2011, at 12:01 PM, andy butler wrote:
>
>> Chris Beaty wrote:
>>> Hi simeon,
>>> thanks for getting back
>>> I'm simply trying to control the LP1 with my Roland FC-200
>>> this actually used to work, once upon a time
>>> now, when I put the unit in the MIDI/USER btn mode, and push the
>>> FC-200 pedals, I get Nada
>>> I've checked the midi traffic withe pedal-channel 1 and other midi
>>> devices see incoming data from the FC-200
>>
>> That would be a sign that the LP1 midi channel is not set to one that
>> the FC-200 is sending on.
>>
>> andy
>>
>>
>>
>>
>>
>
> Thanks,
> Chris
>
>
>