[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP Feedback and Volume Pedal

> At 01:24 PM 4/16/2006, Kim wrote:
> Make sure you are using the correct type of pedal. It should be a volume
> pedal intended for line level signals, where the pot is around 20kOhm. If
> you are using a volume pedal intended for guitar the resistance will be 
> high, around 250kOhm. Most of the range of the pedal will not be
> recognized. So you may have to move through a lot of the pedal range 
> you reach the point where the EDP recognizes it.

Bingo!  That's what's happening.  Thanks, Kim!