] [Thread Prev
RE: EDP next loop question
You can configure the EDP to do a LoopCopy = Ti
1. Press Record, play sound
2. Press Next Loop. This ends the first and immediately
starts recording the second loop. If you press
Record to end the 2nd loop it will quantize to
the timing of the first loop.
> -----Original Message-----
> From: L. Angulo [mailto:firstname.lastname@example.org]
> Sent: Mittwoch, 2. Februar 2005 00:45
> To: Loopers-Delight@loopers-delight.com
> Subject: Re: EDP next loop question
> Hi Mark,
> Yes,ive tried this but one of the problems i have by
> hitting record is not getting the timing exactly while
> jamming.I basically want to start soloing right away
> after ive layed down a b part and thats the nice thing
> about the round mode when i do a second press of "next
> loop" before closing it, which allows me to relax and
> give me a bit of time to think about the solo.It would
> be nice if i could stay in the second loop though!
> --- email@example.com wrote:
> > > Loopers,
> > > In recordig 2 loops i want to remain in loop 2
> > when i
> > > press next loop, but it inmediately jumps back to
> > loop
> > > 1.It does it when i end recording with overdub but
> > is
> > > there another alternative to this? i also want to
> > keep
> > > the same loops lenght.
> > > thanx
> > > Luis
> > >
> > > =====
> > > www.luis-angulo.com
> > End loop 2 by hitting "Record".
> > Mark Smart
> > www.marksmart.net
> Do you Yahoo!?
> The all-new My Yahoo! - Get yours free!