] [Thread Prev
Re: Echoplex Input issues.(i think)
(whispering) i think that i have heard this stuff on my ebow work as well,
along with some other swell type inputs that i have tried. i have not,
however, heard it on the decay, only on the attack. it seems to help if i
start a silent loop and overdub. i dunno why. don't give up hope.
still stick by the edp as being the best sounding thing out there; and as
ebow looper, i cannot do without the transparent loop point on the edp.
----- Original Message -----
From: "Kim Flint" <firstname.lastname@example.org>
Sent: Monday, November 17, 2003 10:38 AM
Subject: Re: Echoplex Input issues.(i think)
> there is a noise gate on the input, but if you can actually hear it so
> obviously your input level is set way too low. Turn the input up higher.
> (or you have a really old software version, the gate level was set too
> in the earliest versions.)
> At 02:09 AM 11/17/2003, lol c wrote:
> >Hi all
> >Those who have been following my rather shakey first foray into the EDP
> >owning world will know by now that ive been having a few problems, well
> >this weekend Ive had no stutters , resets or distorted signals, I have
> >found a new problem.
> >I was trying to record a ebow loop which fades in from nothing when i
> >noticed that on the recorded loop the ebow comes in suddenly and with a
> >distinct beginning (as opposed to a pure fade in from 0) the same also
> >happens on the fade out.
> Kim Flint | Looper's Delight
> email@example.com | http://www.loopers-delight.com