] [Thread Prev
RE: Pedal Response with Echoplex Digital Pro using "In" Loop Mode
At 06:07 PM 4/27/2003, Clayton Gary Lehmann wrote:
> >I bought a Boss FV-50L pedal to use with my EDP. Haven't used it much
> >use MIDI to control my loops--but then I discovered the "In" mode and
> >it--but I find that the response curve isn't right in this mode.
>Our friend Kim replied:
>"isn't right" I suppose is a subjective thing. The pedal is directly
>controlling the input volume into the loop in the "In" mode. I suppose if
>the pedal doesn't offer a feel that you like, you should try a different
>>Let us now speak of the feel of the Boss Pedal. It's plastic and easy to
>>push. I don't mind it.
By "feel" I also mean the range and taper of the pot inside the pedal. You
clearly don't like this one.
>>I just tried an old Ernie Ball. It feels great! It doesn't have the
>>values tho--won't make the input volume change . . .
then how could it feel great if it doesn't do anything?
>>Guess that means I
>>would have to replace the pot. Last time I tried doing home electronics
>>ruined two FS300s trying to make an EDP foot pedal replacement.
maybe you need to find somebody else to help you with soldering....
>>What pedal is recommended for using the "In" mode to control the Echoplex
>>using the foot pedal input on the back of the unit? Isn't the FV-50L the
I use the Boss FV-50L pedal, it works fine and controls the volume
as it should. They are easy for people to find in stores. For me the
control range and taper feels fine, so I don't have a problem recommending
it. But that's subjective. If you don't happen to like the range, feel
to look for something else and let us know what you find. There are a lot
of pedal options out there and I certainly haven't tried even a fraction
them. I think Hans once recommended an Ernie Ball pedal with a low
impedance pot, maybe you will like that one better.
Kim Flint | Looper's Delight
firstname.lastname@example.org | http://www.loopers-delight.com