Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Cable direction my ass



-----Original Message-----
From: Bret <echoplex@yahoo.com>

>While the following quote is not about analog signals on a cable, this
>stereophile article shows measurable differences in jitter from an
>spdif source depending on the direction of the cable:
>http://www.stereophile.com/printarchives.cgi?368
>'Changing the direction of the digital interconnect between the
>transport and the jitter analyzer.

Now you're talking about frequencies that are MUCH higher than the audio 
band.
Complex impedences take effect.  An improper cable, a bad connection, etc. 
can
cause REFLECTIONS of the signal resulting in jitter.  Direction can affect
signal integrity in this situation.  But that has nothing to do with the 
copper
of the wire.  Remember, this is NOT an audio band signal.  The physical 
design
of wire, insulation (material MATTERS), ground, shape, connectors, etc. 
could
affect what goes on here.

Cheers,

Bill        billfox@fast.net           http://wdiyfm.org/programs/emusic
===============================================================================
Host of EMUSIC, an electronic, ambient, and space music show.  Thursdays at
11 pm on WDIY 88.1 FM, Allentown and Bethlehem and 93.9 FM in Easton and
Phillipsburg.  Email me if you wish to submit music for airplay 
consideration.
Radio Station Home Page: http://wdiyfm.org
Personal site: http://www.users.fast.net/~billfox
To subscribe to the EMUSIC on WDIY list, go to
http://groups.yahoo.com/group/emusic-wdiy and click on [Join This Group!]
SOUNDSCAPES Concert Series: http://www.tadream.net/soundscapes