[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP, DirectMIDI, quant, 8ths
Cool, Phil! I've seen German singer Michael Shiefer sending SySex into
two EDPs with no glitches. http://youtu.be/zzdFnZIpYCA. Nice to hear
you got it working now.
Greetings from Sweden
Per Boysen
www.boysen.se
www.perboysen.com
www.looproom.com internet music hub
On Wed, Jul 13, 2011 at 9:05 PM, Phil Clevenger
<phil.clevenger@gmail.com> wrote:
> Mark, and Per,
>
> Yes, Program Changes for EDP preset changes are the basis for the
> controller setup. But I find there are too many permutations of possible
> presets for that to be the complete solution. 5 or 6 basic workflows,
> then each wants some quant or 8ths or swichQuant or Insert variation,
> too much hunting and pecking.
>
> So, two more levels I have added to my 5 or 6 basic preset workflows:
>
> 1) Virtual Parameter button: each patch on my FC 300 includes not only
> preset program changes, but a parameter button, so that worst case I can
> do with my feet what I used to do with my hands :)
>
> 2) Control Switches: Depending upon the workflow (glitching,
> quantSubstitute, unrounded mult, stutter, etc), there are usually a
> couple of salient needs that are related to the context. For instance,
> quantSubstitute may want the ability to quickly move between 8th
> settings. So I make those available on Control Switches for that
> patch... and in that example, the SysEx string is what i needed to get
> that, as there is no directMIDI for the 8th values. I have 4 control
> switches available currently: I use two for global needs common to
> every patch (for me) : Set Start Point and QuantMIDIStartSong, then the
> other two are set up on a per-patch basis as described.
>
> This setup scheme seems to get me to where I want to be with a minimal
> amount of tap dancing 90% percent of the time. Hooray !
>
> Phil :)
>
>
>
>
> On Jul 13, 2011, at 3:54:54 AM, Mark Francombe wrote:
>
>> I Think the way these function are supposed to be controlled using the
>> EDP methodology
>> is to save them as presets.... But sounds like you're well on the way
>> to developing an
>> awesome set up. I would love to swap one of my edps for a LP1... And go
>> for a system like you!!!
>
> On Jul 13, 2011, at 4:24 AM, Per Boysen wrote:
>
>>> On Jul 12, 2011, at 12:00 AM, Phil Clevenger wrote:
>>>
>>> I am discovering that LoopIV in the EDP does not seem to have a way to
>>> directly control 8ths/Cycle, Quantize, or SwitchQuant.
>>> How are you folks controlling these params with your MIDI controllers?
>>
>>
>> BAck when I was using an EDP I mocked up a bunch of presets with
>> different useful combinations of those settings and then I simply sent
>> external MIDI Program Change from my pedalboard to call up the preset
>> needed at any moment.
>>
>> Greetings from Sweden
>>
>> Per Boysen
>> www.boysen.se
>> www.perboysen.com
>> www.looproom.com internet music hub
>>
>
>
- References:
- EDP, DirectMIDI, quant, 8ths
- From: Phil Clevenger <phil.clevenger@gmail.com>
- Re: EDP, DirectMIDI, quant, 8ths
- From: Phil Clevenger <phil.clevenger@gmail.com>
- Re: EDP, DirectMIDI, quant, 8ths
- From: mark francombe <markfrancombe@gmail.com>
- Re: EDP, DirectMIDI, quant, 8ths
- From: Per Boysen <perboysen@gmail.com>
- Re: EDP, DirectMIDI, quant, 8ths
- From: Phil Clevenger <phil.clevenger@gmail.com>