[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
EDP startup failures
>Another EDP item: upon power-up, sometimes (rarely) mine doesn't. I
>have my gear all plugged into a power strip. Is it ok to just turn
>that on, with everything turned "on," or should I be using the
>switch on the EDP itself? (When EDP doesn't power-up, I turn the
>switch off and on, and it's ok...)
>Thanks, David
dont worry!
due to the phantastic BrotherSync sample level sync construction and
a constellation of the CODEC, we need to switch the master clock from
one crystal to another at startup.
a pretty weird process since its the processor that does the
switching also depends on the crystals oscillation. so sometimes it
dies there. just start it again and it will be perfect.
if it happens anoyingly often, you can improve by replacing the
crystals (by a hopefully better matching pair).
--
---> http://Matthias.Grob.org