Try isolating the 'tip' connector with a capacitor (.01µf or
larger should do) on the cable to ONE of the units... this will block
the DC but allow the serial data to pass....
I did try to drive both units in parallel and it just would not
It would be a poor mans stereo sync if I could find away to do it.
The EH foot controller for the reissue 16
second delay is the same as the footcontroller for the 2880 but very
very different than the original 16 second delay
The new style controller uses a
microcontroller sending serial data to the unit and powered by the
I think a simple passive A/B
selector would be all you need to have independant control of two
units. It is possible that the unit could also drive two units
simultaneously, but I only have one 16 sec and one 2880 and
these are mapped differently so I cannot test it.....
I have been trying to find out if
there is a way to use two of the 16 second Reissue delays units with
one remote foot switch.
I have called Electro Harmonix several times and they never return my
Does any one know how the foot controller works and a way for it to be
happy seeing two units.
More new features than ever. Check out
the new AOL Mail!