Re: Electro Harmonix help

[Charles Zwicky <cazwicky@earthlink.net>]

Title: Re: Electro Harmonix help

Try isolating the 'tip' connector with a capacitor (.01µf or larger should do) on the cable to ONE of the units... this will block the DC but allow the serial data to pass....

> Thanks,
> I did try to drive both units in parallel and it just would not
> work.
> It would be a poor mans stereo sync if I could find away to do it.
>
> Bill
>
>
> -----Original Message-----
> From: Charles Zwicky <cazwicky@earthlink.net>
> To: Loopers-Delight@loopers-delight.com
> Sent: Tue, 26 Feb 2008 12:56 pm
> Subject: Re: Electro Harmonix help
> #AOLMsgPart_2_e669f473-f49e-421b-8af1-6f3b7d7e91a7
> The EH foot controller for the reissue 16
> second delay is the same as the footcontroller for the 2880 but very
> very different than the original 16 second delay
> controller.
>
> The new style controller uses a
> microcontroller sending serial data to the unit and powered by the
> unit.
>  I think a simple passive A/B
> selector would be all you need to have independant control of two
> units. It is possible that the unit could also drive two units
> simultaneously, but  I only have one 16 sec and one 2880 and
> these are mapped differently so I cannot test it.....

I have  been trying to find out if there is a way to use two of the 16 second Reissue delays units with one remote foot switch.
I have called Electro Harmonix several times and they never return my calls.

Does any one know how the foot controller works and a way for it to be happy seeing two units.

Thanks Bill

---

More new features than ever. Check out the new AOL Mail!

>
>
> --
> ...
> http://www.zmix.net

---

> More new features than ever. Check out
> the new AOL Mail!

--

...
http://www.zmix.net