Re: All Access/Echoplex/Prophesy

[Matthew F.McCabe <mmccabe@finleysound.com>]

I'd double check to make sure you've cleared all the CC data out of those patch changes.  I was having the same problem and even though I didn't program the CC data in at the time (I think it was leftover from a previous configuration - I change my set-up way too frequently) it was still there.

Matt

---
King Never
http://www.kingnever.com

On Jun 22, 2006, at 6:35 PM, Donearlsto@aol.com wrote:

> Hello, 
>     I am having issues with my All Access/Echoplex/set up and I am hoping someone on the list may be able to help me.  
>       Echoplex is set to receive control changes on Midi Channel 2. 
>       The instant access switches work great, and all the programming works out (momentary switches etc.)
>       However, sometimes when I select a patch change (sent on midi channel 1 to the Prophesy) the Echoplex responds as if I hit the record button, or a series of parameter editing buttons.  The prophesy still changes patches, of course.  
>       As the Echoplex is set to Midi Channel 2, and the patch changes are being sent on Midi channel 1 I, in my ignorance, can't figure out how to remedy this.  Any help would be appreciated.  
>  Thanks in advance. 
>  Donovan Stokes