[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP LOOP4 question: Accessing individual loops directly

Great tips Kim thanx!
this beast has no end,gotta lock myself again for a
few days;-)

--- Kim Flint <kflint@loopers-delight.com> wrote:

> At 03:21 PM 9/13/2005, Luis Angulo wrote:
> >i wonder if it will work having Quant=on then i can
> >jump between differnt arrangements...?
> Luis-
> Use the SwitchQuant parameter to quantize switching
> between loops. There 
> are several options for it to jump immediately, at
> the next cycle point, at 
> the loop end, plus the "confirm" modes. The
> SamplerStyle parameter lets you 
> determine if the loop starts at the beginning and
> keeps going, starts where 
> you left it and keeps going, triggers and plays one
> time, or plays as long 
> as you hold the note and stops when you let go. And
> the Velocity parameter 
> lets you have the loops be velocity sensitive, so
> their volume is set by 
> how hard you hit the note. (assuming your controller
> is velocity sensitive. 
> that's usually not the case with midi pedals.) Take
> a look at the manual 
> for more details.
> have fun,
> kim
> Kim Flint                     | Looper's Delight
> kflint@loopers-delight.com    |
> http://www.loopers-delight.com 


Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around