Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP LOOP4 question: Accessing individual loops directly



At 03:21 PM 9/13/2005, Luis Angulo wrote:
>i wonder if it will work having Quant=on then i can
>jump between differnt arrangements...?

Luis-

Use the SwitchQuant parameter to quantize switching between loops. There 
are several options for it to jump immediately, at the next cycle point, 
at 
the loop end, plus the "confirm" modes. The SamplerStyle parameter lets 
you 
determine if the loop starts at the beginning and keeps going, starts 
where 
you left it and keeps going, triggers and plays one time, or plays as long 
as you hold the note and stops when you let go. And the Velocity parameter 
lets you have the loops be velocity sensitive, so their volume is set by 
how hard you hit the note. (assuming your controller is velocity 
sensitive. 
that's usually not the case with midi pedals.) Take a look at the manual 
for more details.

have fun,
kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com