[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: RE: Changing EDP Parameters via MIDI

Thanks, Claude.


-----Original Message-----
From: Claude Voit [mailto:c.voit@vtx.ch] 
Sent: Thursday, July 14, 2005 7:02 AM
To: Loopers-Delight@loopers-delight.com
Subject: RE: Changing EDP Parameters via MIDI

The excel spreadsheet (
http://www.loopers-delight.com/tools/echoplex/echoplex.html )is great
for all midi commands but wont give you the commands to switch quantize
on/off on the edp.(it is on the LD site this is sys ex domain

Quant Cycle
F0 00 01 30 0B 01 01 13 02 01 00 01 F7
Quant 8th
F0 00 01 30 0B 01 01 13 02 01 00 02 F7
Quant loop
F0 00 01 30 0B 01 01 13 02 01 00 03 F7
Quant Off
F0 00 01 30 0B 01 01 13 02 01 00 00 F7


There's a handy Excel spreadsheet that sets out all the EDP MIDI


Can't remember where I found it (probably on Loopers-Delight). Can
forward it to you if you like.

Best wishes



> From: <loopdelightml@nosuch.biz>
> Date: Thu, 14 Jul 2005 00:47:50 +0200
> To: <Loopers-Delight@loopers-delight.com>
> Subject: RE: Changing EDP Parameters via MIDI
> Hi Kris
> It's not such a big deal to set up presets on the EDP. I have one that

> I use for the Insert=SUB quantized and one non quantized.
> Other solution: On the PMC-10 you can assign arbitrary MIDI-Strings to

> be sent on a button down and other arbitrary MIDI-Strings on button
> I don't know about the Behringer FCB1010.
> Bernhard
> -----Original Message-----
> From: Hartung, Kris [mailto:kris.hartung@hp.com]
> Sent: Mittwoch, 13. Juli 2005 23:00
> To: Loopers-Delight@loopers-delight.com
> Subject: Changing EDP Parameters via MIDI
> Can anyone point me to a primer on if, and how to change parameters on

> the EDP via MIDI? Rick has me experimenting with Insert=SUB with 
> quantize set at 8th notes, which generates some cool effects, but 
> normally when I play I want quantize set to OFF. Can I send a MIDI 
> signal to the EDP to change quantize to 8th notes, perform the Insert 
> magic, and then turn the quantize back to OFF? I suppose this will 
> take three button pushes on my FCB and consequently take up three more

> buttons on the unit..
> I suppose I could create a preset on the EDPs with these Quantize 
> settings, and select that with a program change, but I was hoping to 
> avoid the work of setting that up.
> Kris