] [Thread Prev
Re: midi foot controller for loop triggers manipulation et al
Sorry, but you're wrong. Try switching Midi-map learn mode on and off
(Ctrl-M on the keyboard) and look on the screen specificly at each channel
(and Master) where the "Sends" box is. Notice how a new extrabox pops up
dissapears when turning midi-learn on and off?
Notice on the Master channel how that new box contains a play button and 2
up and down arrows and a square with a number?
There's your MIDI-mappable "Scroll up/down" and "play all", or on each
channel "Play selected clip".
Now go ahead and map that to your FCB and enjoy Live even more! ;)
----- Original Message -----
From: "Per Boysen" <email@example.com>
Sent: Wednesday, May 19, 2004 3:06 PM
Subject: Re: midi foot controller for loop triggers manipulation et al
> Hi Tias,
> In Live there is no way to "trig selected clip" from external midi.
> However this can be done with the computer keyboard by using the arrow
> keys and the return key. So a way to do what you are saying is to use a
> third application that will transform incoming midi data to computer
> key strokes. I know there is such a utility for Windows available and
> for Mac I guess it's easy to set it up with some apple scripting (?).
> Maybe that's what Charlie did to come up with ControlAid?
> On 2004-05-19, at 14.03, Tias wrote:
> > Seems like my first reply didn't go through.. So here it is again. :)
> > Why not just set one pedal to trigg selected sample on each channel in
> > Ableton and then 2 pedals to controll scroll select up and down.
> > That should give room for pretty nifty foot-work on the FCB.. ;)
> > /Tias
> > ----- Original Message -----
> > From: "Per Boysen" <firstname.lastname@example.org>
> > To: <Loopers-Delight@loopers-delight.com>
> > Sent: Tuesday, May 18, 2004 1:58 PM
> > Subject: Re: midi foot controller for loop triggers manipulation et al
> >> Yes, the FCB is quite big, but there's nothing like it in the same
> >> price range.
> >> If you are planning to loop live with Ableton Live, triggered by a
> >> foot
> >> pedal, you will need a lot of midi pads for your tap dancing. This is
> >> because you have to address each loop on each audio channel directly.
> >> So you need a dedicated midi message to start or stop each loop. One
> >> way to get around this is to use the little software ControlAid. Can
> >> be
> >> downloaded for free at http://www.charlie-roberts.com/controlAid/.
> >> This
> >> software will let you manipulate Ableton Live from a FCB1010 in a way
> >> similar to how you work a Repeater from the FCB.
> >> All the best
> >> Per Boysen
> >> ---
> >> http://www.boysen.se
> >> http://www.looproom.com
> >> On 2004-05-18, at 13.22, mick ritchie wrote:
> >>> Hi all
> >>> sorry to start here with a basic question - Ive looped for a long
> >>> time
> >>> with samplers computers and minidiscs but have gone back to some
> >>> guitar in a duo and need to find a decent little midi footpedal to
> >>> trigger AbletonLive and other software - both loops and control
> >>> changes
> >>> I picked up an fcb1010 for another job and found Id got an older
> >>> model
> >>> and couldnt get it working in time without the current eprom chip so
> >>> it went back - I also thought it a bit big for carrying about and
> >>> thought maybe someone out there could recommend something more
> >>> compact
> >>> - like half the size with a contol pedal and some switches that I
> >>> could program without too much of a headache?
> >>> Or if the 1010 is the most flexible beast Ive now sourced a current
> >>> model in a different shop
> >>> mick ritchie
> >>> try out http://www.resonancefm.com for loops insanity and plaster
> >>> casts fm artradio for London UK