[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
OT:
Slightly OT:
I use my fav digital delay (Vestax DDG-1) as a short interval looper (up
to 1024ms), but it is slowly giving up to work, and they are very rare.
Does anybody have a tip of todays new pedals/ztable units (not rack
mount!) for the following delay features:
- behaves like a tape upon delay time change (like a EHX SMMH in loop mode)
- dedicated hold switch (not momentary - just circles delay buffer until
switched off, input to buffer switched off, no fade)
- delay time modulation with separate depth and speed control, capable of
extreme settings, approx. from 0.05 Hz to at least 20 Hz
- has a separate dial for a delay time multiplication, e.g. 0.5x - 2x,
furthermore if delay dial is already at 0.5x, then resulting range would
be 1-4x and vice versa for the other extreme.
- writes slices of live signal into delay buffer at moentary buffer
position, when fast on/off-switching the hol.
- stereo would be nice, but mono already works with me.
you probably won't find much ddg-1 live examples anywhere, however, the
1980s rack mount predecessor vesta fire dig 411b is technically the same
unit, though mono. But any rack unit is too big for my travel setup.
recently checked out the super awesome death by audio echo dream 2, but it
is missing the hold switch.
http://www.deathbyaudiostore.com/ProductDetails.asp?ProductCode=DBA012
any hints on otehr product or diy things? thanx a lot!
jayrope
---
kliklak.net
aircushionfinish.com
prinzenallee.com
- Follow-Ups:
- RE: OT:
- From: Ivodne Galatea <takas20@hotmail.com>