[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Boomerang survey - please respond
The Boomerang III (absent the SideCar) doesn't have a dedicated stack
button. Stack is one of the functions you can assign to the dual (tap v
hold) buttons. So, at button press time the Boomerang III might not know
whether the loop was being closed or not.
Mark
> On May 18, 2014, at 1:33 AM, andy butler <akbutler@tiscali.co.uk> wrote:
>
>
> I'm quite surprised to see this discussed, a bit like re-inventing the
> wheel.
>
> Any other sensible loop device with more than one button has the option
> to end
> a recording with a choice of switches which give the option to go
> smoothly
> into overdub, or to go to PLayback.
>
> What on earth is wrong about "End Recording with Stack button...go
> straight into stack"?
>
>
>
> andy
>
> Mark Hamburg wrote:
>>> On May 16, 2014, at 11:34 AM, Mike <mnelson@boomerangmusic.com> wrote:
>>> 2 tap record & play with stacking active
>>>
>>> While the Rang™ III can go directly from recording a loop to
>>> playing with stacking active, it is currently a 3 tap process
>>> involving one of the Bonus Buttons. It goes like this:
>>> Tap loop button – recording starts
>>> Tap Bonus button to select Stack – Stack light blinks
>>> Tap loop button – recording concludes, playback begins and Stacking is
>>> active
>
>