[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Using the standard EDP pedal with 2 EDPs
mark francombe wrote:
This depends on the ControlSource param.
Damn!! I thought that parameter stood for ControlChange messages and
Note messages, that you could use both via midi!!
Well yes, you're right,
it affects the response to incoming midi (Note or Ctr)
and also the midi which is output when the
button is triggered
(either by midi, or front panel or footswitch
you mean... It depends on whether the control signal is passed on to the
second unit?
so they can only talk to each other if EDP generates the midi type
that EDP2 is listening for.
Well usually yes... but I like the idea that I have a pedal
that operates both simultaneously, Im imagining recording 2 things
seperately (using front panel, or iPad) with 2 different lengths, then
doing Quantised Sub into that, with the pedal, will record that chunk to
both, but presumably will go out of synch by an 8th every time...
nice... If Im not mistaken?
iirc the response of EDP2 can be a bit unpredictable in this context.
May not do the 8th Quant thing properly.
I didn't track down exactly why yet.....however once it starts working
it's possible to have a polyrhythmic sync and do 8th rep on it.
What I like to do is to have Quant = Cycle, Insert=SUS
Record a short one beat loop with the EDPs in stereo setup.
Then each "insert" adds a beat.
..and hitting Insert on the edp2 front panel just once makes things
interesting.
I am assured there will be a long soundcheck... thank the lord for that!
If there is one...
good luck
andy