[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Newbie EDP Question
Sounds a little like a hardware problem... Im afraid... maybe a unit
reset would help?
(hold down parameter button while you boot up)
Would a unit reset be a good idea anyway, since I got the unit used?
It was advertised as being in mint condition, and cosmetically it is.
But maybe a reset would be a good idea to clear out any settings that
the prior owner made that I'm not aware of?
Or, let's put it differently. Is there any drawback to doing a reset?
I think I sorted out my problem, though. It might have been a feedback
knob issue. After I made sure the Parameter/Record setting was LOP, I
didn't set the feedback knob to 100%. I left it where it had been
previously, which was maybe 60% or so. Now my first loop seems to
maintain its volume and not diminish at all.
Here's the thing, though. I have another EDP just like this one, and
the feedback knob on it is not set to 100%, but the loop volume
remains constant.
Maybe I should do factory resets on both units and start from scratch?
Thanks,
Jeff