[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Gibson Echoplex trouble
Any new owners of an edp would do well
to go through the factory reset procedure:
"Hold down the PARAMETERS button while powering the unit on."
This will return all settings to default state, much easier
for tech support and to 'know what's going on in general".
Timothy Miller wrote:
Another thing my customer pointed:
And also, something else to note...The various instruments i have
running through the loop, all come out at different volumes (some not
the same volume level as when i looped them) some are louder, some are
softer....There's no real balance...Wondering if that is a problem with
the loop...
It's not a problem with the loop.
If the customer is using different acoustic instruments it *is* quite
difficult
to send the right amount of sound to the looper. Needs practice to get mic
position right.
What helps is getting a good balance of loop volume to live playing volume.
If loop is loud, then layers will build up volume too quickly,
if loop is quiet new layers will disappear.
andy