[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: For you software folks....what interface?
mark francombe wrote:
What does this mean please?
<advert snip>
*All the right I/O - and lots of it*
On the back panel of the Traveler-mk3, there are the four mic/line combo
inputs, mentioned above, as well as four TRS analog inputs.
4 mic/line inputs (mics on XLR)
4 line inputs
all will 8 accept 1/4in jack plugs, but none is good for plugging in a guitar directly
Analog
outputs include eight TRS 24-bit connectors.
8 jack outputs, which we assure you of the highest quality
There are two optical
banks, providing either 16 channels of AADAT at 48kHz, eight channels of
S/MUX at 96kHz, or two banks of stereo TOSLink at up to 96kHz. The banks
operate independently, so you can mix and match optical formats.
If you need another 8 inputs you can buy a (usually quite pricey) box
with an ADAT output and hook it up.
...and then you can do the same again for another 8.
What's
more, RCA S/PDIF and XLR AES/EBU connectors are onboard, providing
independent stereo digital I/O.
there's some sockets on the back that you don't need,
but see below *
There's also a 16-channel MIDI interface
onboard.
</advert snip>
Remember I dont have any digital things (the Fireworx would have to go
Im afraid, to afford it) apart from the Repeater that has a digi out Ive
never tried...
* ahh, well I think you'd be able to plug the Repeater digi out into
the Traveller if that helped.
HELP!! (But no hurry, its gonna take months before I can afford it...)
Have a look at the Focusrite stuff too,
a bit cheaper than RME but still has good mic pre-amps
and a very flexible onboard mixing system accessible from software.
andy