[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP repair in Australia
Probably heat related. Run it with the top cover off, see if that helps.
If not, touch the chips with your fingers to see if any are heating up.
Might as well reseat the chips before all that.
t
----- Original Message -----
From: "andy butler" <akbutler@tiscali.co.uk>
To: <Loopers-Delight@loopers-delight.com>
Sent: Sunday, June 05, 2011 1:28 AM
Subject: Re: EDP repair in Australia
First thing to do would be to check the internal connections and re-seat
the chips.
It would have been checked at the factory, so it's likely
that something worked loose in transit.
andy
r.domain wrote:
Hi all,
I've had a faulty EDP ever since I bought it years ago when they
discontinued the Gibson blackface EDPs. It works for a bit but then it
starts glitching out and it won't let you select various things on the
control panel amongst other things which renders in useless. Is there
any recommended places in South Australia or Australia where I can get
this thing fixed? It's been like this since new :(
Regards,
Ritchie
--
aritchie.com <http://aritchie.com>