[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: A looping fork in the road. Which way do I go?
Are you sure you're not running the system at too high CPU load? If
that isn't the cause there are the two classic troubleshooting
methods:
1) Start the application and rebuild the system from scratch.
2) Take away plugins one after the other until the absence of the
issue hints at the weak spot.
A bit inconvenient though when the glitch manifests so rarely.
I had a glitch in a previous setup, but that was a choice I had made
to save CPU cycles. I was running Mobius AU on the main stereo output
and monitoring through the looper. But today I put the looper on a
parallel bus/aux, do not monitor through the looper and keep a global
signal path from my live audio input going directly to the audio
output. That's also good for minizing latency, but with my previous
laptop such a "noise free" routing would bog down the CPU into the
audio drop-out risk zone.
Per
On Tue, May 17, 2011 at 2:07 PM, todd reynolds <toddreyn@gmail.com> wrote:
> Hey Per... for the record, I do exactly that. Sometimes glitches will
>occur
> during that time, sometimes not, but it seems then to happen reliably
>in
> performance. I had one person suggest recently that the problem might be
> power, as one thing which is happening during performance is the
>addition to
> lights, though you can be sure my power isn't on a dimmer! lol.
> Well, I don't think it's that. Still working on it.
> T.
>
>
> On Mon, May 16, 2011 at 12:45 PM, Per Boysen <perboysen@gmail.com> wrote:
>>
>> > i've recently had four shows disturbed by audio glitches, and I can't
>> > seem
>> > to fix it whatsoever.
>>
>>
>> Try to "rehearse your show". I mean, just play for as long time as the
>> show is planned and make sure your rig doesn't mess up.
- Follow-Ups:
- New Video
- From: "boost" <boost@boosterized.com>