[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Multi-Echoplex Midi Command
this is how it works in my configuration
midi controllers >> kenton quad merge >> midi solution event processor
plus
>> midi solutions quad thru. >> echoplexs
each echoplex is on a different channel.
the midi controllers only send info on one channel.
the event processor is duplicating the midi info on other channels
according
to a chosen midi-note on or off...
that's the best solution i found...
about brother syncing...
- the best i did is 4 echoplex, 5 won't work in my experience (mathhias
said
i was lucky it works with 4)
- doing a multiple rec on several echoplex won't work. i mean, it works a
few seconds (minutes) but the loops are not really in sync. there are just
quiet the same lenght.
what is working is doing a rec on one of the echoplex, waiting for the
others to receive the lenght loop info, and then you can do a multiple rec
on all other echoplex.
hope it helps.
boost
----- Original Message -----
From: "Sean Echevarria" <fuckthespam@creepingfog.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Wednesday, February 16, 2011 5:24 PM
Subject: Re: Booster Echoplex New Video
> Absolutely - the PMC10 can send any messages you want in every patch
> (including sysex).
> Free windows editor: http://www.creepingfog.com/sean/pmc/download.html
>
>
> At 2011/02/16 07:48 AM, Louie Angulo wrote:
>>This is why i got the PMC10 recently, i hope that works,AFAIK the
>>PMC10 can set note commands on different channels per patch and not
>>just globally like the FCB1010
>