[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: fianlly a video of using mobius and ableton!
ok Rainer,so let me get this straight,that means i just install
LoopBe for ex. assgn the midi out port of mobius to midi in port of
ableton live to slave it and whenever i start a loop the audio clips
in live will stretch and sync to my mobius loops? that would be it!!
Luis
On Tue, Jan 25, 2011 at 12:27 AM, Rainer Straschill
<moinsound@googlemail.com> wrote:
> Am 25.01.2011 00:19, schrieb Todd Matthews:
>>
>> The only way Live can work like that is with the latest version 8 of
>Live.
>> Now you can do that by using the plug-in, Looper, that can set the
>tempo of
>> the set depending on the length of your loop. Otherwise if you record
>> straight to audio clips you gotta listen to
>
> This was also possible since "day one" (I only started to use Live w/
> version 4, but I believe it was also possible in earlier versions) using
>any
> looper (hardware or software) that would create a MIDI clock and issue a
> MIDI start command and syncing Live to that.
> In the software domain, I have been doing that successfully since about
>2005
> (or 2006?) using Möbius. What you need here, however, is to route Möbius'
> MIDI output to Live, which is best accomplished using a software MIDI
>patch
> cable such as MIDIYoke or LoopBe.
>
> Rainer
>
> --
> http://moinlabs.de
> Follow me on twitter: http://twitter.com/moinlabs
>
>