[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Q Steps (SUS = Substitute) commands in the LP-1
On Jan 3, 2011, at 10:37 AM, Rick Walker wrote:
> In order to get this to work you need to program a button on your midi
>pedals
> (back in the main menu) with Q replace on the first command and Q
>replace on the second command.
> (I'm not even sure why this is necessary but I know practically that it
>is)
>
> Now, every time you make a momentary press, the machine will replace
>the very next
> full 'slice' (or Q) with whatever it is that you are playing currently.
Thanks. I had already seen that trick. For a true SUS command, however, I
think it should also work until you release the button in case you want to
hold it longer. Hence, you could program a quantized, single unit replace
which works in the most common way for using SUS commands, but it isn't
really a SUS command.
But now, if only the Q steps setting could be set as part of the
programming on a MIDI button (and for that matter if Scramble obeyed Q
steps).
Mark