[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Q Steps (SUS = Substitute) commands in the LP-1
I just posted without reading your Andy's post about SUS commands
and my post was inaccurate after reading his, stating that true
SUS commands are not possible in the LP-1.
(wouldn't that be fairly easy to program into the software of the unit,
out of curiosity?)
I guess it can't do SUS commands but the effect seems very similar
to the SUS = Substitute function in the EDP when it was
used with a quantized press. Now it's been so long since I've done this
I might be mangling the command sequence but anyone who's used this
function in the EDP knows what I'm talking about.
I always used SUS = Substitute in a momentary way to create silent
glitching
in a loop but I found that I can get much shorter glitches by setting
Q steps to a fairly high integer, so the effect is very, very close to
the same
audibly (in fact, I'll bet I could put both units side by side and
people would be hard pressed to
hear the difference , save the better fidelity and stereo functionality
of the LP-1).
rick walker