[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
LP-1: 1.34 or 1.37?
> Current consensus is that 1.34c is the most stable,
> with 1.37 being good for most users.
Hey Andy,
I can't remember if I asked you what your stability issues with 1.37
were. What were you doing to cause it to crash? So far I have some
problems when recording a really short loop and then starting to mess
with it with track speed and q replace, occasionally a false trigger
will send the machine into self oscillation. Occasionally if I get too
trigger happy using q replace the machine will take some time to
finish all of the cycles, but thats more about me being careless with
my technique. I still have somewhat of a volume issue where
subsequent tracks I create seem to be progressively louder than the
last ones I made, that doesn't seem to be caused by typical issues
of playing louder to rise above an increasingly saturated soundscape.
This issue I have been compensating for by being more conscious of how
I'm attacking the instrument and how I use compression. There also
seem to be the reoccurring issues of too many overdubs on a single
track saturating and clipping the output, if feedback is set at 100%.
Thoughts, reflections, insights??????
Bill