[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Help with Glitch/Stutter technique Kaiser square mod
one from the vaults
*******
Vortex Varispeed
Atmosphere B
Set:-
Mix 32
Mod FX LVL and Echo LVL 64
Echo 1& 2 1
Feedback 1 64 or less maybe
Feedback 2 1
Resonance 1 64
........and assign pedal to resonance 2
********
You now have a pedal activated varispeed echo,
the effect gets greater on shorter delay times.
with the below described technique it works like this
so, save that to both sides of a pair of registers,
with Morph=64 ( which is fastest..right?)
de-assign pedal to Resonance2.
on reg A,
Resonance2 = 1
on reg B
Resonance2 = 64
now, when you engage the GrobSquareWaver you get
the Kaiser effect.
Or something like it,
or something different, I can't be 100% sure,
but you'll like it I hope.
andy
mark francombe wrote:
> On Thu, Aug 27, 2009 at 2:04 PM, andy butler <akbutler@tiscali.co.uk
> <mailto:akbutler@tiscali.co.uk>> wrote:
>
> :-) try and pay attention, this has been discussed before.
>
>
> Sarky booger Butler!!!
>
> Actually I do things like this all the time, and Andrew, I mostly do it
> with your beloved Vortex!!! I have one synched to an EDP (using the Grob
> Cable) but instead of sunthing the tap tempo, i trigger the morph AB..
> with wildly different settings on A and B patches I get that squarewave
> mod thing.. I tell ya thats from Glitchingtonville Arizona...
>
> --
> www.markfrancombe.com <http://www.markfrancombe.com>
> http://vimeo.com/user825094
> http://uk.youtube.com/user/markfrancombe
> http://www.myspace.com/markfrancombe
> http://www.looop.no/shop/catlabel.php?q=Synch%20Non%20Synch