[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: MY NEW TOY
thanks Andy,
but you did answer it really. It's funny but i recently compiled alot of
my
tunes for release on Bandcamp. I realized that the best (meaning my
favorite) sounds were all direct into the board recordings. i have used
whatever amp/speaker modelers I had in whatever fx box I was using at the
time. All the newer stuff was done while wearing headphones in a quiet
apartment.
I arrange it so that my chain is distortion/fuzz into amp modelers
(currently Digitech RP 250 and or Korg AX 3000G) into modfx/delay/reverb
into loopers into sometimes more mangle fx into mixer. Not the best way
but
there ya go. i stay stereo from the outputs of the multi fx boxes. i
really
want a proper mixer so that i can feed more of everything into everything
else sort of :)
All that said i still believe that a good real amp cranked up sounds
better.
I just can't do that anymore in real life. I guess it come down to good
tone
being subjective. I am always looking for "the" sound. hmmm, maybe this?
http://www.beavisaudio.com/Projects/DBS/
And your right about Bill Walker! He has the "tone"!
First cup 'o coffee wearing off, gotta go get more!
best,
Jeff
Ad astra per alia porci - Steinbeck
http://jeffduke.org/
http://www.myspace.com/loopsinphasespace
http://jeffduke.bandcamp.com/
http://www.ustream.tv/channel/loopydroneyglitchywacky-presents
http://www.justin.tv/loopslab
http://www.vimeo.com/jeffduke
http://www.reverbnation.com/thejeffduke
http://virb.com/jeffduke
http://themineisthemind.blogspot.com/
http://www.youtube.com/user/sticky899
http://www.sugarat.org/tecbab/
----- Original Message -----
From: "andy butler" <akbutler@tiscali.co.uk>
To: <Loopers-Delight@loopers-delight.com>
Sent: Tuesday, June 30, 2009 10:15 AM
Subject: Re: MY NEW TOY
> Jeff Duke wrote:
>>> Rather than put two amp sims after the fx, surely it would be neater
>to
>>> put one amp sim between guitar and fx.
>>
>> What would you recommend in a stereo amp sim Andy?
>>
>> Jeff
>>
>
> Oh, I'm probably the worst person to ask about amp sims ;-)
> Ask Bill Walker.
>
> I only really started playing electric guitar when I started looping,
> and while I played bass through a nice valve setup for years I eventually
> found that it just wouldn't reproduce the sort of playing I put into it.
> (i.e. I used to sometimes get quite a lot going at once, but wasn't
> willing to reduce the low frequency content of the sound.)
>
> Hence I now use JBL Eons for everything, and don't possess a decent amp
> sim.
>
> Currently I'm experimenting with a Moogerfooger Lo-pass to mellow
> out the fuzzy tones from my ADA MP1 valve pre.
>
> However, the raw fuzz/overdrive sounds I use sound ok to me, and it seems
> also to the audience. Only knowledgeable guitarists have sometimes
> to worried that I have a flat battery somewhere ;-)
>
> Generally, I reckon that for a looping device, a clean full range sound
>is
> preferable
> so that the layers can remain distinct in the mix.
>
> Hence I would always put an amp sim before the looper, rather than after.
> Then it would be possible to build up a mix using different amp tones.
>
> My guess was that Ted wanted to "ampify" his pa speakers by putting a
> stereo
> amp sim (two SansAmps) just in front of them.
> It's a different approach...and I don't doubt he'd make it work.
>
> I'd say 'hope that helps', only as I didn't
> answer the question...... :-)
>
> andy
>
>
>
>