[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: RC-50 multiple outputs?
Hi Alex
first of all, welcome to LD :)
You have the following possibilities with the RC-50:
- Input Aux/Mic/Instr > Phrase 1,2,3 Left/Right
- Phrase 1,2,3 Left/Right > Output Main/Aux Left/Right
The Inputs are quite obvious, simply adjust the levels.
You can define for each Phrase (Loop), if it will be played via Output
Main,Aux or both. You need to go into the PATCH/PHRASE settings for this.
The only way to "split" your loop into different parts is to:
- either use different PHRASES that are linked i.e. Main Out (vox,keys),
Aux Out (Guitar)
- if you are working mono, use Left/Right to split the signal
Esp. splitting Left/Right is a good idea. You may need to be careful with
the signal levels, however. Also, what is a real pity on the RC-50 is that
you cannot pan the MIC INPUT on the RC-50. So you'd probably want to use a
small mixer for all your inputs: i.e. pan your guitar hard LEFT, pan
vox/keys hard right and send them through Instrument Input to the RC-50.
best regards
Buzap
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01