[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: using an RC-50 with a Boss DR-657 drum machine
Since delivery of the ebay dr-670 I've been trying to do what is supposedly
not recommended, that is have the 670 master to the rc-50. Since it's
commonly known that the rc-50 loops eventually 'drift' out of sync, I'm
wondering if this is because of the 670 only uses a 3 digit tempo (ie,
120,121....183..and so) while the rc measures tempo using tenths (ie.
120.1,
120.3, 180.9 and so on). I've noted that if you advance the tempo on the
670
say from 120 to 121, the rc will not match this but rather will go from
120.0 to say 121.1. Perhaps this is not significant to the issue of why the
670 serve as master to the rc. Any thoughts and of course if someone has
ever gotten the 670 to master with the rc ans slave, I'd love to hear the s
settings.
Cheers,
Mike
From: Teddy Kumpel [mailto:teddybut@mac.com]
Sent: April 23, 2009 9:42 AM
To: Loopers-Delight@loopers-delight.com
Subject: Re: using an RC-50 with a Boss DR-657 drum machine
what are you doing different than than rest of us?
Are you using a pre-recorded loop to establish tempo or tapping the
tempo in?
Teddy
On Apr 23, 2009, at 7:43 AM, Christo Jota wrote:
> Hi Teddy,
> yeah, checked it out yesterday evening. No problems...
> Christo
> ----- Original Message -----
> From: "Teddy Kumpel" <teddybut@mac.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Wednesday, April 22, 2009 3:12 PM
> Subject: Re: using an RC-50 with a Boss DR-657 drum machine
>
>
> are you sure...
>
> for everyone else it drifts out of sync over time when syncing to midi
> in
>
> check again
>
> Teddy
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.3/2076 - Release Date: 04/23/09
06:30:00