[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Another EDP question
Stephen Scott wrote:
> I don't know whether I'm doing something wrong, or whether I have a
>slight fault with my EDP (running loop4), (or even if I've found a bug),
>but I've come across something unexpected...
>
> At times, when I have quantize=8th, and I press either multiply or
>insert (rpl or sub), the EDP 'hangs' (display shows three waiting boxes
>indefinitely). If I change quantize to off or cycle or loop, everything
>behaves as expected. Changing quantize back to 8th brings the problem
>back. (btw, I have 8ths/cycle set to 8, but I've tried other values, no
>difference. Also, when in the hanging state, another press of the same
>button does resolve things of course).
>
> This seems to be happening during and following use of a preset where I
>have 'tempo select' turned on. However, if I then go to another preset
>(ie, one that doesn't use tempo select, the problem persists. What's
>really weird is that if I then power down the EDP and then turn it back
>on again, the problem is sorted (until I next go to my 'tempo select'
>preset). This seems kind of odd, because, I think, all current settings
>are retained in memory (? in preset 0), and recalled after powering off
>and on,
yep, that's right.
However, it seems that tempo select isn't saved to preset 0
hmm,
just wait while I look up how to save a preset ;-)
> but in my case it seems that a rogue issue is being rectified
>(thankfully).
>
> Any ideas why this is happening?
Well, I wouldn't be surprised if there was a bug.
That behaviour is what happens if you use quantize and
use Subst of Replace by direct Midi. ( if you release the
press while the ooo shows ).
...but you're using the Insert to do replace.
However, following what you say here I didn't reproduce the behaviour.
Possibly having Sync=In would have something to do with this,
but I'm only guessing here. If you were sending midi-clock to the edp
it would mess with the 8th Quant behaviour.
> I don't know if any of my other settings are causing this.
If you're keen to get to the bottom of this then
a list of any non-default settings would help me to exactly duplicate
what you did to get the result.
...and also an exact list of all actions after boot-up
....Because I'm clueless about this so far
andy
>
> Stephen Scott
note to Matt....told you Stephen was a good tester :-)
>
>
>
>
>
>