[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Performing with Multiple Looped Sections
What? "the software EDP"?
On Dec 5, 2008, at 4:58 PM, Per Boysen wrote:
> I've done that on an EDP and on a Repeater. Today I do it all the time
> on a laptop that runs the freeware looper Mobius. The soon-to-come
> software EDP will also do that.
>
> --
> Greetings from Sweden
>
> Per Boysen
> www.boysen.se (Swedish)
> www.looproom.com (international)
> www.ubetoo.com/Artist.taf?_ArtistId=6550
>
>
>
> On Fri, Dec 5, 2008 at 9:16 PM, Steven K <makemusic44@gmail.com>
> wrote:
>> Hello.
>>
>> I'm looking to finally invest in a looping system, but wanted some
>> advice on
>> which hardware or software device would suit my needs.
>>
>> I've seen numerous videos and performances throughout the years of
>> people
>> looping. But I don't think I've ever seen someone use multiple
>> loop sections
>> that transition from one to the next. Usually, the musician is
>> looping the
>> same drumbeat and adding/subtracting instruments.
>>
>> What I'd like to do is have loops that represent the verse, loops
>> that
>> represent the chorus, loops that represent the bridge - and be
>> able to
>> switch back and forth between the sections in real time, with the
>> ability to
>> add/subtract sounds to each section.
>>
>> Additionally, a device with multiple outputs is preferred, so that
>> the house
>> PA can mix the signals properly... unless there's another
>> workaround I'm not
>> thinking of.
>>
>> Any help/advice/suggestions will be appreciated.
>>
>> Thanks
>> - Steven
>>
>