[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: effective mobius,mixer and soundcard routing
Thanx kevin,yes this is the way ive always routed my EDps with a hardware
mixer,aux send to edp and out to a channel.Actually this is the way i
cnnected my soundcard right away as soon as i got it but i was getting
weird oscilating and noise results and i figured out it was because i had
to turn all the faders down the software mixer,in other words i was using
2 mixers at the same time.It sounds great now!
However i am still not completely satisfied because there is a soundcard
to connect,a hardware mixer and a laptop to worry about,compared to my
hardware setup i still dont see many advantages to this(setup time wise)
except for the felxiblity of mobius and software/soundcard pristine sound
quality.
www.myspace.com/luisangulocom
--- On Wed, 12/3/08, kkissinger@kevinkissinger.com
<kkissinger@kevinkissinger.com> wrote:
> From: kkissinger@kevinkissinger.com <kkissinger@kevinkissinger.com>
> Subject: Re: effective mobius,mixer and soundcard routing
> To: Loopers-Delight@loopers-delight.com
> Date: Wednesday, December 3, 2008, 8:35 AM
> Forgot to mention:
>
> Make sure the button on the "Stereo Graphic EQ"
> strip is in the "UP" (Main Mix) position.
>
> Also, on the FX section, make sure the FX to MON pot is all
> the way to the left.
>
> The bottom line: make sure all of your MON send pots are
> all the way to the left except for the strips that you want
> to send to your laptop looper.
>
> -- Kevin
>
> Quoting kkissinger@kevinkissinger.com:
>
> > Regardless of the mixer, to accomplish what you want
> you would need to
> > configure your looper (in this case, your
> laptop/Mobius system) as a
> > SEND EFFECT.
> >
> > The profx8 has two Sends, namely the MON and FX sends.
> >
> > Since you want to use your onboard reverb your FX send
> is already tied
> > up, so that leaves the MON send.
> >
> > For your return (I assume you want a stereo return)
> use either your
> > 9/10 or 11/12 strip. This will allow you to send your
> laptop's output
> > to the FX buss. Be sure that your MON send is turned
> down -- else you
> > will get feedback. Also, make sure that the FX to MON
> pot is turned
> > down else you'll get feedback.
> >
> > Remember, you don't have to use the ST RETURN to
> return send effects.
> > Also, the ST return can be used as two additional
> mixer inputs
> > (although this input doesn't have any EQ, panning,
> or sends).
> >
> > The MAIN OUT will go to your speakers.
> >
> > Hope this helps :)
> >
> > -- Kevin
> >
> > Thus, you would hook
> >
> >
> > Quoting "L.Angulo"
> <labaloops@yahoo.com>:
> >
> >> Hi loopers,
> >> i have different instruments plugged in to my
> compact pro fx8 mackie mixer then i go stereo out of the
> mixer into my soundcard and from there straight into the
> speakers.My soundcards fireiwre out straight into my
> macbook and mobius.Everything is cool,except when i puse my
> loops it sounds very abrupt and dry because there is no
> post proccesing.I would like to therefore take avantage of
> my mixers eqs and reverb to warmup the sound coming out of
> the soundcard before it goes into the speakers.
> >> What would be the most effective way to route
> this,is it possible to bring back the outs of the
> soundcard back into the mixer without creating feedback?
> >> my mixer does not have alt 3/4 outs,but here is
> the specs:
> >> http://www.mackie.com/products/profx8/
> >> thanx for your tips!
> >> Luis
> >>
> >>
> >>
> >> www.myspace.com/luisangulocom
> >>
> >>
> >>
> >>
> >>