[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Mixer Inserts, what the wiring??
Hi Mark,
Here's the quick answer:-
In order to use an Insert as if it was a direct out you need a special
cable.
One end is a normal jack, the + of which is connected to both tip and ring
of a stereo jack at the other end. (Shield connection as usual).
Then plug the "stereo" jack into the Insert socket.
mark francombe wrote:
> by using stereo jacks wired funny?? or maybe is it just to replace one
> jack on a standard mono jack cable to be a stereo jack where the 2 hot
> contackt are bridged??
that's it exactly
> how do I do this?
Soldering.
Easiest way is to start with a regular mono cable and replace one jack
with stereo,
bridging the tip & ring as you suggest.
>
> Mark
andy