[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: echoplex questions
Thanks Dave. I am using the EDP controller, so this is helpful.
If it's displaying the current cycle number, can I still overdub?
At 4:34 PM -0600 11/24/08, Dave Gallaher wrote:
>
>On the EDP controller, I sometimes get the same result; the loop will keep
>playing, but I can't overdub and cycle numbers appear with each additional
>push of Overdub. When this happens, I do one of two things:
>
>1} finish playing the piece that is using the loop, end by hitting Record,
>then hit Undo. Normally, this will return to regular operation, but not
>every time. If it fails, then
>
>2) reboot the EDP. This will restore it to normal record/overdub
>operation
>in my experience.
>
>I have not used the function that gives C-1 etc, but it seems to be
>counting
>cycles when in this mode. Hopefully someone on the list with more
>experience with deeper EDP ops can chime in here.
>
>If you are using the foot controller, I heartily recommend BEFORE YOU
>POWER
>UP THE EDP, manually tap all the buttons ten or twenty times. I have had
>much fewer problems with incorrect response to commands since I started
>doing this. DO NOT DO IT WHILE THE EDP IS POWERED UP, OR YOU WILL RESET
>YOUR VALUES AND PARAMETERS IN A WAY THAT WILL REQUIRE A FAIRLY LENGTHY
>REPROGRAMMING ON THE GIG. Voice of experience...
--
David Gans - david@trufun.com or david@gdhour.com
Truth and Fun, Inc., 484 Lake Park Ave. #102, Oakland CA 94610-2730
Blog: http://cloudsurfing.gdhour.com
Web site: http://www.dgans.com
Photos: http://www.flickr.com/photos/dgans
Music: http://www.cdbaby.com/all/dgans