[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Loop software with varispeed-thankyou
ta, Stefan,
but what I *don't* know is what is the standard response curve for Midi
PitchBend.
I presume I need to do an exponential to convert from the data (calculated
as you describe below)
to the frequency.
...but wonder if that's actually the case, as for a 2 semitone bend a
linear conversion sounds ok.
many thanks for your help
andy
Stefan Tiedje wrote:
> andy butler schrieb:
>> Unfortunately, 128 steps is the standard that we have to work with for
>> CC.
>
> If you receive controller 1 for the MSB (128-bit) and then receive
> controller 33 for the LSB just add 1/128th of that value to the MSB (in
> what ever range it was) and you get a higher precision...
>
> That should work with faderboxes of higher precision like a Motormix out
> of the box...
>
> If you do rapid prototyping in Max/MSP, have a look at my ctl.in
>abhaXion.
>
> The last versions of my St.ools are here...
>
> for Max 5: http://dl.getdropbox.com/u/288305/St.ools%20for%205.zip
> for Max 4: http://dl.getdropbox.com/u/288305/St.ools%20for%204.zip
>