[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: LP first report
It appears that after the low noise modification, the LP1 has become more
sensitive to power line spikes which is what is causing the reboots. I
will
look in to this and see if I can find a solution. If the screen goes
blank,
hit the MENU button several times until it comes back.
As for the RM65B, I suspect that there is a ground loop. Most likely it
is
a ground loop through the chassis. If you were local, I could probably
modifiy the LP1 to eliminate the ground connection through the chassis,
but
since you aren't, my recommendation would be to get a set of electically
isolating mounts for the rack. I don't remember who makes them, but I
have
seen them before.
I hope this helps,
Bob
----- Original Message -----
From: "L.Angulo" <labaloops@yahoo.com>
To: <bobld@amstadt.com>
Sent: Saturday, November 01, 2008 2:21 AM
Subject: LP first report
> Hi Bob,
> how are u? i made it safe in one piece,but after such an intensive
>looping
> week i am still getting back to nromality here!
> anyway,about the looperlative:
> the good news is that it has been behaving more reliable,it only locked
>up
> once as i was trying to set the xpression pedal on me so far, and the
> noise and level problems are gone!
> The bad news is that when i turn my P.A. spakers on the looperlative
> screen goes blank and i can only see the peak input nd output levels, it
> also sometimes goes into reloading the software.
> The other is that i bought a rackmount mixer, a rolls rm65b to use it in
> conjunctio with the LP
> http://www.rolls.com/product.php?pid=RM65b
> but when i connect the LP in its effects loop,it makes a static noise
>and
> the mixer becomes noisy and cannot use the LP at all.No problems however
> when i use the LP with my soundcraft mixer.This is strange because the
> rack mixer is new and works clean and fine with eveything else,i have no
> idea about electronics but could it be some sort of ground problem?
>could
> you take a look at the rolls specs and tell me what the problem might be?
> also why do u think the screen is going blank when i turn the P.A. and
>why
> does it reboots? this doesnt happen with my EDP or any other equipment...
> i hope i can get this sorted out,i just want to use my LP the way
>everbody
> does!
> thanx and i await your response
> take care
> Luis
>
> www.myspace.com/luisangulocom
>
>
>
>