[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: New Echoplex
wow, in all those years I have never seen a broken processor!
I suspect it was also some bad contact at its socket... or some
tolerance missmatch...
thank you for helping each other!
Matthias
On 7 Oct 2008, at 05:27, Tilmann Dehnhard wrote:
> a friend of mine had a similar problem and had it repaired in berlin.
> main processor was broken, as far as i remember.
> i could connect you offlist, if need be.
>
> best - tilmann
>
> Daniel Hegarty schrieb:
>> Hey Travis,
>>
>> I have, in every possible combination! They look clean and well
>> seated, and i tried just doing 2 at a time to see if the issue was
>> a bad SIMM, but they all give the same resul.
>>
>> Thanks
>> D
>>
>> On 6 Oct 2008, at 20:52, Travis Hartnett wrote:
>>
>>> The standard EDP-weirdness troubleshooting move is to power down,
>>> unplug it, open it up and remove and then reseat all the SIMMs.
>>> Have you tried that?
>>>
>>> TH
>>>
>>> On Mon, Oct 6, 2008 at 12:33 PM, Daniel Hegarty
><danielphegarty@googlemail.com
>>> <mailto:danielphegarty@googlemail.com>> wrote:
>>>
>>> Thanks David,
>>>
>>> Unfortunately my unit is making the noise 90% of the time, and
>>> not consistently at power up or power down.
>>>
>>> Does anybody have any ideas about this problem? There's nowhere
>>> to get it fixed in the UK, so I'm in a bit of a jam!
>>>
>>> Thanks in advance
>>> Daniel
>>>
>>>
>>
>