[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Vocal & Guitar looping - How can I switch vocal on & off?



Hi Mark, a simple yet effective technique that I use for my JamMan is to run a mic cable directly to a guitar volume pedal (provided it's a 1/4 inch output) and then out from the volume pedal using a 1/4 to male XLR conversion cable into the mic input on your JamMan. Once youv'e done this, you can record the vocal loop at a volume similar to a live background singer and then sing live with the volume pedal at full output. Looking at your volume pedal as a mixer/foot control might open up other creative uses as well....... "KalimbaMan"

Sent via BlackBerry from T-Mobile


From: Mark Young <mark@musicbymark.net>
Date: Sun, 06 Jul 2008 23:07:36 -0500
To: <Loopers-Delight@loopers-delight.com>
Subject: Vocal & Guitar looping - How can I switch vocal on & off?

Hi, using:

*Digitech JamMan w/ FS1 footswitch
*Acoustic guitar
*SM58 vocal mic

HOW CAN I:

   Loop ONLY GUITAR, so I can GUITAR SOLO/LEAD over the VERSE CHORDS w/o any vocal ?


On the CHORUS, I often want to Loop  guitar AND vocal (which is automatic on JamMan), & harmonize over the chorus vocal.

I did a search for a vocal A/B box, but only found the "Panic Button" (approx. $135 @ Musician's Friend), as regular A/B  or A/B/C boxes are all hi-imped / 1/4" jacks. Is Panic Button the way to go? Any suggestions???

Thanks for any help or suggestions on controlling this or any loosely related strategies that might be interesting.


Mark Young
1,124 Memorized Requestable Songs... 50s, 60s, 70s & Today
Folk, Rock, Pop, Funny, Country, & Originals
www.musicbymark.net / www.myspace.com/somanysongs