[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP overdub switch kills loop feedback after one cycle
Hi Richard, perhaps it's me, but your solution here, doesn't make
sense. There ARE only 16 midi channels regardless of whatever
device you're using. So I'm not sure what's happening there.
No biggie, of course, since it seems to have solved your issue, so way
cool! :)
However, it really seems like there's something else going on here
in the first place...
Can you give a more detailed note on your FCB settings and EDP
settings?...
For me at least, it's not clear (could be the blonde thing!
lol!) and I'd like to help if I can...
Thanks so much and have a wonderful day!...
Smiles,
Cara :)
At 10:01 AM 10/11/2007 -0700, you wrote:
I
have encountered another problem controlling my EDP with the foot
controller. the first has been resolved...prob and resolution below ... i
include this because the new problem is similar....
power on and record the first loop....no problems and all functions
available thru the pedal and EDP...everything works as it should
when i reset record on the EDP using the midi foot controller or
the front panel and start a new loop it plays only one cycle of the
loop and then stops. I have reset the EDP to factory defaults to
make sure i havent inadvertantly changed a paramater... . then i also
discovered you have to reset the echoplex presets
thru further experimentation i have found that apparently the
initial use of the midi controller changes a preset parameter in the
echoplex after the first loop..which one i cant figure ....i have
established this by resetting the presets after disconnecting the
fcb1010 and using the echoplex footswitch.. once i do this everything
is back to normal with the plex...
resolution ....reset all unused fcb functions to an unused channel...they
were set to
midi channel 25 in the fcb and the plex has only 16 midi channels
...once i changed the fcb settings to channel 15 the problem stopped
now i am trying to run a single latched footswitch from the overdub jack
on the back of the plex ....when this switch is plugged in the plex
behaves as above stopping after the first cycle...remove the switch and
the problem goes away....changing the preset value for feedBKC has no
effect...where is the plex getting this extraneous setting from? what
will kill the loop after only one cycle....
this is a great group and i appreciate the help it has been.....closer to
performing at every step i am....
firehawks
Moody friends. Drama queens. Your life? Nope! - their life, your
story.
Play
Sims Stories at Yahoo! Games.
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.14.6/1060 - Release Date:
10/9/2007 4:43 PM
---
View my on-line portfolio at:
http://www.onemodelplace.com/CaraQuinn
"The only things I really think are important, are love, and each other. -Then, anything is possible..."
http://home.earthlink.net/~cara-quinn
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.14.6/1060 - Release Date: 10/9/2007
4:43 PM