[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: Using RC50 as an AUX Loop on a Mixer
Quoting Dan Katayama <dan.katayama@gmail.com>:
> Any of guys using the RC50 as an Aux loop on a mixer for additional
>looping
> capabilities?
> I'm short a few inputs and am trying to do this, but can't seem to get
>the
> levels on the send/returns right.
> Anybody have any recommendations?
Dan,
I have had success using the INST input with the INST Input Level at
the 9 o'clock position and the Master Level all the way up (5 o'clock
position).
Since the Mackie puts out a line level signal, to use the INST input
(which supports instrument level) requires a comparably low input
level setting.
-- Kevin