[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: 2880 footswitch
While the original 16 second delay used a simple
resistive divider to send different control
voltages to the control a/d in the unit, the 2880
uses a microcontroller in the footswitch to send
serial data.
It would be impossible to construct your own
without programming the proper codes into the
microcontroller.
CZ
>On 6/24/07, Jesús Manzanares <slipi.yo@gmail.com> wrote:
>>i just bought a 2880 and don't want to spend 100¤ on a footswitch which
>is
>>doing nothing for my sound. IZve been told the fottswitch for 16 sec
>delay
>>and hog are the same but with different graphics on it. is there any
>>reliable source of an schematic round there that anyone is aware of??
>
>I have the 16 sec delay footswitch and I took it apart to see how it
>works. I didn't spend a lot of time on it, but there is more to it
>than just resistors and capacitors. Probably best to just buy the
>real thing from EHX...
>
>Doug
--
...
http://www.zmix.net