[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: EDP Multiply Question
Thanks Andy, as in my prior note, I'm reacquainting myself with the EDP
so this helps out a lot!...
Have a great day!...
Smiles,
CQ
At 06:44 PM 6/20/2007 +0100, you wrote:
>Sorry, David,
>It's pretty obviously my question.
>The Interface Mode thing was my big input to LoopIV.
>
>
>
>What you want to achieve is possible with your current setup
>1) Hit NextLoop
>2) Do the noodling
>3) Hit Mult when you want to OD the results of the noodling.
>
>I know that's not the answer you want ;-)
>
>so
>
>Or can be done by setting Loop/Delay = DEL
>
>
>That puts you in Delay Mode, which changes the way Overdub works.
>It makes overdubbing the default, so that when the OD(overdub) LED
>is green you're always overdubbing.
>Then hitting OD gives you a Freeze function
>(i.e. switches overdub off)
>
>So in effect it's a model of a basic digital delay with a Freeze,
>such as you might be familiar with.
>
>As long as you're in Freeze ( OD LED = Red )you can do a Multiply
>and not have the input overdubbed.
>(Note, that's exactly what you want).
>
>This feature was suggested by me during Loop IV development
>in order to achieve exactly what you wanted here.
>...but you need to thank Matthias Grob for programming it.
>
>Another possibility is to use a footpedal, and set Loop/Delay = Inp.
>Then the pedal controls the volume of the input, so it's
>just a matter of doing "toe up" when you Multiply.
>
>I notice you use StutterMode.
>Sorry there's not a solution which allows you to do this and keep the
>Stutters.
>
>...but if you have any audio examples of Stutter Mode use,
>I'd love to hear them.
>
>andy butler
>www.andybutler.com
>
>David Auker wrote:
>>I'm reposting this, as got overlooked in the laptop frenzy :-)
>>All I want to do it copy the loop's material to another loop (which may
>>already have content). Do it w/o overdubbing, so I can noodle for a
>>while until I want to include it in this new spot.
>>Regards 'n respect, David
>>David Auker wrote:
>>>What setting(s) enables Multiply-to-next loop w/o any overdubbing going
>>>on? I mostly just want to copy to next loop (overiding any
>pre-existing
>>>material there), and play while that's happening but not overdub at
>that
>>>time. I'm using FCB1010, SwitchQuant=Cnf,
>>>AutoRecord=On, LoopCopy=Snd, LoopDelay=Stu.
>>>
>>>Thnx!
>>>
>>>David
>>>
>>>
>
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.446 / Virus Database: 269.9.0/853 - Release Date: 6/18/2007
>3:02 PM
---
View my on-line portfolio at:
http://www.onemodelplace.com/CaraQuinn
"The only things I really think are important, are love, and each
other. -Then, anything is possible..."
http://home.earthlink.net/~cara-quinn
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.9.0/853 - Release Date: 6/18/2007
3:02 PM