[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
RE: Anyone using NI Guitar Rig 2?
Zipper noise.... Perhaps we'll have to make it an effect ! ;-) aka
make 'bugs' into 'features'
-Qua
-----Original Message-----
From: Per Boysen [mailto:perboysen@gmail.com]
Sent: Monday, February 26, 2007 2:54 PM
To: Loopers-Delight@loopers-delight.com
Subject: Re: Anyone using NI Guitar Rig 2?
> Per Boysen wrote:
>> I'm not using the dedicated hardware pedal, Rig Kontrol 2, but I'm
>> wondering if the noise artifact issue is active there too?
>
On 26 feb 2007, at 23.00, Stefan Tiedje wrote:
> Which audio interface are you using? eventually a combination of audio
> and Midi? Some of them would react with cracles on too much Midi data
> streaming in, seems to be a driver and/or firmware issue...
Hi STefan,
I have been trying different combinations of Audio Interfaces and MIDI
interfaces. RME Multiface, Ecco Indigo i/o as audio and as MIDI both the
RME
built-in MIDI in port and a separate USB MIDI-Link interface. I have also
noticed similar "zipper noise" in other software (Ableton Live) and
external
devices like my TC Electronic FireworX - all happening when manipulating a
parameters values by external MIDI CC. So it seems to be a general issue
and
very hard to isolate. Some patches are more vulnerable than other, but I
have not found any rules yet.
Greetings from Sweden
Per Boysen
www.boysen.se (Swedish)
www.looproom.com (international)
http://tinyurl.com/2kek7h (latest music release)