[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: SV: Electro Harmonix 2880
I tried that, same problem. The time still wavers. The "midi out"
also doesn't act like a "midi thru". Anything I put after it wasn't
receiving the proper time.
I have live but that's not gonna help out the live setup.
On Nov 22, 2006, at 3:09 PM, Thomas Wingren wrote:
> Hi Bobby,
>
> I have the 2880 and use it to loop percussion in sync with a laptop
> running
> Ableton Live. Midi out from the 2880 is connected to a Roland 404.
> Both the
> 2880 and the 404 is in perfect sync with Ableton.
>
> But I have had problems with other equipment when the midi network
> is very
> long. Do you have the same problem if you connect the ER-1 direct
> into the
> 2880?
>
> /
> Thomas
> www.expansionsmusic.com
>
>
>
> -----Ursprungligt meddelande-----
> Från: Bobby [mailto:bobby@deepsoda.com]
> Skickat: den 22 november 2006 16:51
> Till: Loopers-Delight@loopers-delight.com
> Ämne: Electro Harmonix 2880
>
> Has anyone had any luck running the 2880 slaved to another device?
> I've tried a few configurations but nothing's working.
>
> My band plays live with a Midi network on stage. The midi chain is as
> follows:
>
> <master> Korg ER-1 Drum machine (Drummer sets song tempo and
> listens to
> click) <midi out>----> <midi in> Echoplex (git loops) <midi thru>
> ---->
> <midi in> Korg MS2000B (arpeggiator or tempo delay with bass fed
> through
> audio in of keys.)<midi thru> ----> <midi in> Electro Harmonix
> 2880<end>
>
> If you record in the first bank it stretches the audio all over the
> place.
> I tried leaving that bank 1 empty and starting the loop in bank
> 2 . That
> worked once but it eventually lost sync with the other devices and I
> couldn't make it happen again.
>
> I'm about to sell it and get an Echoplex if nobody has any ideas.
> I'm no "Midiot". I just think this little machine is trying to be
> smarter than it needs to be.
>
> Rob
> www.myspace.com/deepsoda
> www.deepsoda.com
>
>