[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: Boss RC-20 Loop Station - Voice Through?



I own a boomerang as well as an RC-20. Boomerang lets you suppress the live
signal but there's no "live signal only" output.

If you use a splitter to send one live signal to the looper and the other 
to
its own recording track, you could reconstruct what you are envisioning in
your recording program. After you've recorded your performance, move the
live-only track in your recording back in time by one iteration of your
loop, and you'll have the same result - loops minus live on one track, live
signal on the other.

Adrian West
www.adrianwest.com


> -----Original Message-----
> From: Diana Thompson [mailto:pushingair@hotmail.com]
> Sent: Tuesday, June 13, 2006 3:11 PM
> To: adrian@adrianwest.com; Loopers-Delight@loopers-delight.com
> Subject: RE: Boss RC-20 Loop Station - Voice Through?
>
>
> That's an idea. I've worked with setting up my loops in Cakewalk
> before and
> found it more difficult to get the loops to measure well with the
> phrases.
> And since it's a demo, I want to get the performance as close to live as
> possible. It would simply be more organic for me to use my existing live
> setup.
>
> I understand that other loopers, like the Boomerang, allow the
> live line to
> bypass the looper output. Maybe there's a hack for this one.
>
> >From: "Adrian West" <adrian@adrianwest.com>
> >Reply-To: <adrian@adrianwest.com>
> >To: "Diana Thompson"
> ><pushingair@hotmail.com>,<Loopers-Delight@loopers-delight.com>
> >Subject: RE: Boss RC-20 Loop Station - Voice Through?
> >Date: Tue, 13 Jun 2006 14:42:38 -0700
> >
> >Not possible.
> >
> >Most recording software lets you set up loops - wouldn't that be easier?
> >
> >Adrian West
> >www.adrianwest.com
> >
> > > -----Original Message-----
> > > From: Diana Thompson [mailto:pushingair@hotmail.com]
> > > Sent: Tuesday, June 13, 2006 10:06 AM
> > > To: Loopers-Delight@loopers-delight.com
> > > Subject: Boss RC-20 Loop Station - Voice Through?
> > >
> > >
> > > I'm trying to record a demo using the RC-20, a Behringer
> Eurorack MX602A
> > > mixing board, and Cakewalk on PC. I'd like to be able to send the
> > > live voice
> > > to one track and the looped voice to another. Right now, I can
> > > set the live
> > > voice to one track, but the Loopstation passes the live voice
> > > along with the
> > > looped voice to the second.
> > >
> > > Is there a method or a hack to bypass the live voice and send only 
>the
> > > loops?
> > >
> > > Thanks,
> > >
> > > Diana
> > >
> > > _________________________________________________________________
> > > On the road to retirement? Check out MSN Life Events for
> advice on how
> >to
> > > get there! http://lifeevents.msn.com/category.aspx?cid=Retirement
> > >
> >
> >
>
> _________________________________________________________________
> Don’t just search. Find. Check out the new MSN Search!
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
>